Polaris RZR lift kit

[muddymama]

Does anyone have any recommendations as to which lift kit to use (or not to use) on a 2008 RZR 50"?

 

[Canadianking]

Buddy had a highlifter 2" in his and had no problems with it.

 

[arff]

We are using the rubber down customs on our 09 Rzr. No issues.

 

[brutematt750]

Rubberdown customs make good stuff. An there Canadian!!


Sent from my iPhone using Tapatalk while working extremely hard

 

[rzrgade]

Rubber down make a good simple lift.Racertech make a better lift,top mount,but more money both work well.I would add HIGHLIFTER springs as well on all four corners. If you put on either lift and your springs are original , you will be lucky to get back to stock height. That`s how much they would of spring sagged by now. Also the ride difference with the HL springs is huge,much better.
The rubberdown/highlifter spring kit is a great inexspensive combo............

 

[Fallen]

Rubber down make a good simple lift.Racertech make a better lift,top mount,but more money both work well.I would add HIGHLIFTER springs as well on all four corners. If you put on either lift and your springs are original , you will be lucky to get back to stock height. That`s how much they would of spring sagged by now. Also the ride difference with the HL springs is huge,much better.
The rubberdown/highlifter spring kit is a great inexspensive combo............

X2 on the highlifter springs. I only did the high lifter springs, and it made a big difference. The stock springs start to sag in the fist 100 miles. I put 26" zillas on rzr no rubbing with just highlifter springs all around, you might even be able to go 27" tires not sure though.

 

[muddymama]

Thanks for all the information. We are thinking of going with either Rubberdown or Razortech 2". Thanks for the help, greatly appreciated! After this past weekend, we will be getting doors as well (our buddy rolled his rzr......)

 

[mikecbi]

Roktec 3 inch lift kit is a nice lift. No issues with cv binding and you can relocate the sway bar