Milwaukee tools

[BEL]

I am guessing that is the M18, that you linked. Hmnn interesting, serious dilemma here on which 1 I should get.

Those things are fantastic!

 

[turbo392]

I’d stay away from using M12 batteries unless you need something handheld and lightweight. The M12 batteries do not have any balancing circuitry in them like the BMS in the M18 batteries. I’ve had a lot of the M12 batteries ‘fail’ and they need to be disassembled for proper manual recharging. The battery shuts off with the lowest voltage cell pair while in use and stops charging with the highest voltage cell pair. Eventually the highest and lowest cell voltages drift apart making the battery pack unusable. (red / green blink)

 

[MK4TDI]

This is a huge price drop and everyone with an M18 battery should have one of these: https://www.homedepot.ca/product/mi...erter-for-m18-batteries-tool-only-/1001588652 I paid like $140 this summer and that was on sale!

You can run a starlink off those as well just an FYI.

 

[smokinD]

I’d stay away from using M12 batteries unless you need something handheld and lightweight. The M12 batteries do not have any balancing circuitry in them like the BMS in the M18 batteries. I’ve had a lot of the M12 batteries ‘fail’ and they need to be disassembled for proper manual recharging. The battery shuts off with the lowest voltage cell pair while in use and stops charging with the highest voltage cell pair. Eventually the highest and lowest cell voltages drift apart making the battery pack unusable. (red / green blink)

Interesting comment, after further research seems you are correct and it would seem that the BMS also only works when charging and quite possibly some of the tools might have it in the tool itself. From what i found out it really comes down to balancing M12 batterie's and not leaving them on chargers or using rapid chargers on them very much unless you are going to use it right away. I am somewhat of a DIY;r and really don't run high demand around home stuff, and must say i like the M12 tools for versatility and lightness. I will use my M18 stuff for more demanding projects though, ie (impact, circ saw, drill etc..) i especially like the heated hoodie though in these cool fall days but must say they can eat a batt fast especially M12. Cycling these M12 batts seems to be the regime from what i am reading and luckily if 1 goes down within warranty time i will have it replaced. HDD would require better voltage batt's for sure, i know a few fella's who only use M12 batt in certain trade area's and others in more rigid work area's of the same trade use M18 and seem to have good luck all around.

 

[turbo392]

When the M12 do eventually fail, you can use a hobby lithium balancing charger on them to bring them back to full health. Unfortunately you need to disassemble the shell and clip leads onto the lower solder connections and not just the terminals visible outside the case.

 

[smokinD]

I must say the M12 cut off saw I got is amazing in versatility use. That little dam thing is easy/light to work with along with cutting capability. Cuts fast and you can cut designs if you need to. Well worth that investment.

 

[smokinD]

Just had to throw this in this thread!

 

[Bnorth]

Was pouring footings last week for the new hot tub deck and had to bust out the M12 rocket light to finish the job after dark, love that thing!

 

[lilduke]

Everybody's favorite tool in action this morning. The milwaukee tower of power.

And remington 60,000 btu forced air heater from crappy tire with the honorable mention.

Doin some pouring too

 

[lilduke]

Battery ran out, but didnt know the concrete guy was going to take till 10.


On a side note these big 9amp or 12 amp batteries are kinda scary when they are charging.

Its like a mini nuke sitting there. Humming away

 

[TROLLCAT]

so I have a 3/4 impact gun me thinks it 2 years old use for wheels on automotive mostly

yesterday it would remove wheel nuts on a F150 need a snipe and breaker bar to break them loose

me ??? is the battery's toast or is the impact done, look for real world info

me is thinkin the gun is done

 

[Bnorth]

so I have a 3/4 impact gun me thinks it 2 years old use for wheels on automotive mostly

yesterday it would remove wheel nuts on a F150 need a snipe and breaker bar to break them loose

me ??? is the battery's toast or is the impact done, look for real world info

me is thinkin the gun is done

try it with a different battery?

 

[TROLLCAT]

try it with a different battery?

got 2 battery's the same age me thinks there not good

I have battery from chain saw wondering if that will fry the impact gun

 

[MP Kid]

got 2 battery's the same age me thinks there not good

I have battery from chain saw wondering if that will fry the impact gun

If it’s all Milwaukee and the M18 series, they’re all interchangeable.

3/4” on automotive..? Should twist anything off like a candy wrapper.

I have the latest 1/2” hi-torque gun and it work on large Ag wheel studs over 500 ft lbs

 

[lilduke]

Those big 12amp batteries will fry the milwaukee vacum lol. but should be ok in the big impact i would think

 

[TROLLCAT]

going to town today going to pick up a new right size battery and try that first

 

[TROLLCAT]

got new battery will post results

 

[smokinD]

got new battery will post results

Forge battery will provide the best power/torque. I have a 1/2 with a forge and that thing will twist studs off if not careful with the setting.

 

[TROLLCAT]

The adapter is cracked me thinks this may be a issue
Will update after more testing

 

[smokinD]

Maybe some good deals available for some looking for a few items, 1 DAY ONLY!!

https://blog.kmstools.com/2024/11/27/milwaukee-100th-anniversary-tour-events-at-kms-tools/