Lookng for this bolt

[ZRrrr]

Been to a couple bolt shops with no luck. Anyone know where I can find these? Arctic Cat sells them, but not in the size I need.

Head is 1/2" diameter rounded.
Shaft 1/4" diameter by 1/2" long.
Nylock nuts.
Need it some form of rust proof coating or stainless.

Thanks.

 

[powder junkie]

torx screwdriver or wat? id try edm fastners or nut and bolt house.

 

[woody_tobius_jr]

Maybe try the Bolt Supply House on 156 ST just South of 118 Ave ( same parking lot as Totem) , I bought an assortment kit of SS bolts/nuts from Canadian Tire, or maybe Princess Auto.
If they are standard, shouldn't be too hard to find. Metric might be a bit trickier though.
Hope that helps.

 

[badss]

looks similar to a license plate bolt....just about anywhere should have them

 

[Longhorn]

Fastenal...find it on their online site, then go to store with item #, if they dont have it in store, they can order it overnight...

 

[ZRrrr]

Nut and Bolt House, Bolt Supply, already been there with no luck.

I'll try that Fastenal and Edmonton Fasteners.

Thanks Gents.

 

[rusty]

how many do you need?

 

[Sun Sport]

Gregg's there is at least 3 in edmonton

 

[ZRrrr]

how many do you need?

15 more.

 

[munhoez]

Been to a couple bolt shops with no luck. Anyone know where I can find these? Arctic Cat sells them, but not in the size I need.

Head is 1/2" diameter rounded.
Shaft 1/4" diameter by 1/2" long.
Nylock nuts.
Need it some form of rust proof coating or stainless.

Thanks.

Whats the thread pitch and is it metric or standard thread?
It makes it alot easier to find.

 

[ZRrrr]

I don't care about the thread as long as it's 1/4" wide by 1/2" long (or close to it) and I can get a Nylock for it. Also don't care about the driver type needed.

 

[rocketron]

How many do you need? I think I got a box of them in my shop.

 

[Grizzly4323]

Been to a couple bolt shops with no luck. Anyone know where I can find these? Arctic Cat sells them, but not in the size I need.

Head is 1/2" diameter rounded.
Shaft 1/4" diameter by 1/2" long.
Nylock nuts.
Need it some form of rust proof coating or stainless.

Thanks.

Call Vance @ Edmonton Nut and Bolt. 780-465-1466
Probably be Cad plated for corrosion.