Looking for metric air fitting

[TROLLCAT]

I called all over northern BC today looking for a 6mm pushin tee fitting doing a repair on H2 hummer air suspendtion the air lines are 6mm need to connect 3 lines

spellin is off sorry

I called kenworth , peterbiult , volvo , mack . napa , and a couple of off road shops

 

[underdog]

I called all over northern BC today looking for a 6mm pushin tee fitting doing a repair on H2 hummer air suspendtion the air lines are 6mm need to connect 3 lines

spellin is off sorry

I called kenworth , peterbiult , volvo , mack . napa , and a couple of off road shops

I can try my local parts store here tomorrow. They can get almost anything in.

 

[TROLLCAT]

I can try my local parts store here tomorrow. They can get almost anything in.

see if you can pull a rabbit out of the hat

 

[underdog]

see if you can pull a rabbit out of the hat

I'll do the best I can to help Bears business.

 

[TROLLCAT]

I'll do the best I can to help Bears business.

when he wakes up I'll tell him LOL

 

[Trashy]

I called all over northern BC today looking for a 6mm pushin tee fitting doing a repair on H2 hummer air suspendtion the air lines are 6mm need to connect 3 lines

spellin is off sorry

I called kenworth , peterbiult , volvo , mack . napa , and a couple of off road shops

What about Greggs distributing, or someone that deals in air fitting's like Calgary Fastener's or Fastenal???

 

[Stompin Tom]

I called all over northern BC today looking for a 6mm pushin tee fitting doing a repair on H2 hummer air suspendtion the air lines are 6mm need to connect 3 lines

spellin is off sorry

I called kenworth , peterbiult , volvo , mack . napa , and a couple of off road shops

I woulda tried GM, after all its a hummer part. Did you try a standard 1/4" compression brass fitting? a 6 mill plastic airline is so close to 1/4 that it may work with standard compression fittings.

 

[TROLLCAT]

I woulda tried GM, after all its a hummer part. Did you try a standard 1/4" compression brass fitting? a 6 mill plastic airline is so close to 1/4 that it may work with standard compression fittings.

1/4" is a little big and I have no extra line " 6mm " to mess with so no experimenting LOL with 1/4 inch

 

[TROLLCAT]

What about Greggs distributing, or someone that deals in air fitting's like Calgary Fastener's of Fastenal???

Being 600 kms from any parts store is a small inconvence for me LOL

 

[TROLLCAT]

GM wants to replace the whole aircompressor system , nobody fixes chit anymore

 

[cokecrazed007]

Check with Parker or Sweglok in fort st John or in grade prairie they will have something to fix you up or check with a local instrumation shop.

 

[underdog]

Wanna send me a picture of that doohickey, Troy? I'll email it to the parts girl, and see if she can find it.

 

[TROLLCAT]

Wanna send me a picture of that doohickey, Troy? I'll email it to the parts girl, and see if she can find it.

this is my back up plan if I have to scrap the air pump and controler

air fittings have a pushin for the air line (no tools required) need a tee for 6mm air line

 

[cokecrazed007]

That fitting you need I think you can get for aftermarket airbags to connect both bags together. Check out Firestone they make the bags.

 

[Lowlife82]

I'm a distributor for Gregg's. If u can't find one I could check for ya on Tuesday due to long weekend.

 

[TROLLCAT]

I'm a distributor for Gregg's. If u can't find one I could check for ya on Tuesday due to long weekend.

That would be more than great

 

[ferniesnow]

X2 on the air bag lines. When you mentioned a push-in tee it twigged my mind and that's the kind of fittings on my Air LIft bags. Don't know if they are metric or not. Another idea for ya'.

 

[Lowlife82]

Lookin in the catalogue but not seeing any metric "speed fittings".

 

[TROLLCAT]

I had the airbag on the bench today was going to put a standard fitting in it but it's molded plastic and the friggin metric fitting is molded in to it wtf , tomorrow is another day we'll frigger it out

Thank you for taking the time to look for me Lowlife82

 

[Lowlife82]

Do u have a caliper or 0-1mic? What is the od of the hose?