Lightweight Taillight

[xtremegriz]

I wanted a low profile tail light for my Rev so I fabricated my own. Only 1.5" square and 8" long. Chunk of aluminum, 3 led lights and about 3 hrs to make. Turned out pretty good I think.

 

[SLEDBUNNYRACING]

Looks good and gives your sled a bit of that "Custom" look that everyone wants....well done.

 

[Hillclimber]

that looks sweet good job man

 

[xtremegriz]

Thanks guys, I'm not sure what to use to hide or hold the wire coming out of the light. Any Ideas?

 

[Hillclimber]

Thanks guys, I'm not sure what to use to hide or hold the wire coming out of the light. Any Ideas?

2 wholes in the tunnel one right behind the light then one by the bumper and run it tight under the tunnel my thats what i would do but it might see to much moisture.

 

[Rucky]

Ice chunks would probably get it good too.

 

[BIGFOOT]

Thanks guys, I'm not sure what to use to hide or hold the wire coming out of the light. Any Ideas?

How about a aluminum tube or make a U channel to cover the exposed wire?... The light thing looks good & yes covering the wire would be a finish touch.

 

[xtremegriz]

I'll have to find some small tubing because the cooler starts right behind the light. I hope they make tubing small enough.

 

[Hillclimber]

I'll have to find some small tubing because the cooler starts right behind the light. I hope they make tubing small enough.

yea i never thought of the cooler but yea good luck man it does look sick

 

[Uturn]

Thanks guys, I'm not sure what to use to hide or hold the wire coming out of the light. Any Ideas?

Instrumentation tubing, comes in 1/4" to 3/4" and custom bends easily.

 

[Summiteer]

A piece of 3/8" stainless tubing bent up nice would look good there.

 

[xtremegriz]

Instrumentation tubing, comes in 1/4" to 3/4" and custom bends easily.

Thanks for the Idea!! That stuff would work perfect! A friend of mine does electrical. I'll get some off him today.

 

[OVERKILL 19]

If ya have no luck I can get some tubing from the plant today. What size do ya want ,also I have a bender you can borrow. I live up by the water tower if ya want to pick up. Let me know.

 

[xtremegriz]

Thanks for the offer Overkill, but I'll be seeing my bud tonight and he carries an assortment of that tubing on his truck.

 

[cey800]

Nice clean look, start the swet shop.

 

[OVERKILL 19]

Take pics when your done, looks cool

 

[chelle]

That light setup is sweet but I'm trying to find where to get the same light that's on my sled.

It's a 1" x 6" LED bar with about 10 LED lights in it. It came with my sled so I don't know where to get it.

Any thoughts?

It's only about 1/2 thick. I want to put this on my other sled but I don't know where to find it. I'll post a pic of it later.

Thanks

Chelle

 

[wangdoo800]

slp has those lights,look on their website

 

[Summitric]

Actually Fourbarr Industries In The States Makes Them... I Bought Them Direct From Them A Couple Years Ago.... $35.00 Or Sumthin Like That....

 

[chelle]

ya it's fourbar. I checked with the previous owner and he filled in the blanks.

Anybody know if you can get anything like that locally?

Thanks