Jun 29, 2010 #1 rotormech Active VIP Member Joined Dec 18, 2007 Messages 685 Reaction score 286 Location grande prairie is the front diff seal tough to change or any special tools needed?its the seal where the drive shaft goes in...
is the front diff seal tough to change or any special tools needed?its the seal where the drive shaft goes in...
Jun 29, 2010 #2 magnet Active VIP Member Joined Apr 29, 2008 Messages 5,364 Reaction score 1,391 Location GSBA easy to change just take off the shaft and fill with silicone put shaft back in lol:d:d would probably be easier to help you if you gave a bit of a description as to what you are trying to work on.
easy to change just take off the shaft and fill with silicone put shaft back in lol:d:d would probably be easier to help you if you gave a bit of a description as to what you are trying to work on.
Jun 29, 2010 Thread starter #3 rotormech Active VIP Member Joined Dec 18, 2007 Messages 685 Reaction score 286 Location grande prairie sorry ,2005 660 rhino,its the front diff input seal.
Jun 29, 2010 #4 AreWeThereYet Active VIP Member Joined Apr 4, 2009 Messages 12,775 Reaction score 7,554 Location Grande Prairie You will need to unbolt the front diff to get the drive shaft off IIRC, remove the nut, pull the yoke, the pry out the seal.
You will need to unbolt the front diff to get the drive shaft off IIRC, remove the nut, pull the yoke, the pry out the seal.