Kill switch delete

[2012ProRMK]

So I've had my kill switches flipped upside down and years but every once in a while they get water in them and freeze and no longer work, which is a pita.

Considering getting a munster one, but I don't really use it anyway. Can I just either unplug the killswitch from the harness or take the wires and tire then together and delete the switch? Or is there more to it?

Thanks

 

[lilduke]

So I've had my kill switches flipped upside down and years but every once in a while they get water in them and freeze and no longer work, which is a pita.

Considering getting a munster one, but I don't really use it anyway. Can I just either unplug the killswitch from the harness or take the wires and tire then together and delete the switch? Or is there more to it?

Thanks

yeah just unplug it. I have no kill switch on mine

 

[NoBrakes!]

broke the button off mine this weekend, what a PIA to get the little piece inside to pop back out... looking at options now too. relocate, momentary or delete?

 

[ducati]

I always used an O ring under the kill switch to stop accidental shutdown while keeping the switch useable. Essentially makes it a momentary switch for damn near free.

 

[Bnorth]

Just leave it in the stock position and wrap a few O-rings or one of the ol lady's hair elastics around it to turn it into a momentary switch. No freezing issues and no accidental shutoffs from hitting it with your chest.

 

[NoBrakes!]

Does the new red cap just snap back on? the little clear post underneath took a beating on mine too...

 

[Bnorth]

Does the new red cap just snap back on? the little clear post underneath took a beating on mine too...

Yeah it snaps back on as long as you didn't mangle the white part too bad with the leatherman pulling it back up. Doo doesn't sell the button though, only the whole assembly.

 

[2012ProRMK]

Just took it off and unplugged from harness, works good don't think ill miss it.

 

[kimrick]

Yeah it snaps back on as long as you didn't mangle the white part too bad with the leatherman pulling it back up. Doo doesn't sell the button though, only the whole assembly.

I have seen lots of guys just put a small screw in be done.
Gives you something to grab.....

I actually got warranty on my 2016 Doo.
I did have the Red cap in hand and told them it fell off when I pulled it out.

Gibsons can atest to this.
He was suprised as hell that we found it ib all the deep snow. LOL

 

[Shermanator]

I have the Munster, works great...

 

[gibsons]

I remember that

I have seen lots of guys just put a small screw in be done.
Gives you something to grab.....

I actually got warranty on my 2016 Doo.
I did have the Red cap in hand and told them it fell off when I pulled it out.

Gibsons can atest to this.
He was suprised as hell that we found it ib all the deep snow. LOL

 

[giddyup]

with some guys taking them off, anyone got one they want to sell, i need one for a Gen4 PM me if you got one