John Deere Commercial Lawnmower / tractor Belts

DaveB

Active VIP Member
Joined
Sep 18, 2007
Messages
5,946
Reaction score
17,074
Location
Red Deer area
i have 2 JD F725’s. They have 3 belts underneath….2 the same to the hyd pump, 1 around the electric clutch to the mower drive. On my original old unit, the belts were all cracked and nasty when I did my fall maintenance. The belts were ungodly expensive through JD. Replaced with cheapo v-belts from the Spruceview CoOp. That was 8 yrs ago. Still good. When I went through my newer one last fall it got CoOp belts too.
The front deck uses a big long special 2 sided belt and I think it was over 300 bucks through JD. Bought 2 D&D Powetdrive belts on Amazon for 68 bucks each. No issues.
 

Outdoors

Active VIP Member
Joined
Jul 18, 2020
Messages
556
Reaction score
2,287
Location
Mountain
The pip-squeak parts guys act like your Satan when you ask them to go to the back and match up the dang vbelt
 

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,674
Reaction score
23,388
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com
Amazon ? Air filter for my wildcat XX is over 100 bucks from cat it’s 30 bucks from Amazon with a crossover part number.
I been trying there all to narrow, ill go to Napa head office hopefully they have. Even Martins cant find it on there system,
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,455
Reaction score
21,351
Location
edmonton
I been trying there all to narrow, ill go to Napa head office hopefully they have. Even Martins cant find it on there system,
Wouldn’t it be nice if all garden tractors used the same belts lol
good luck, 🤞
 

sirkdev

Active VIP Member
Joined
Nov 2, 2008
Messages
3,268
Reaction score
5,321
Location
Stony Plain
Amazon ? Air filter for my wildcat XX is over 100 bucks from cat it’s 30 bucks from Amazon with a crossover part number.
Careful with that.. a ton of filters are made in china and built to a price point, I get where you are going but that is the one thing I won't go cheap on, has to be a brand I recognize. Just a public service message...
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,455
Reaction score
21,351
Location
edmonton
Careful with that.. a ton of filters are made in china and built to a price point, I get where you are going but that is the one thing I won't go cheap on, has to be a brand I recognize. Just a public service message...
I haven’t used it yet. It’s sitting there next to my next oil change jug. Now you got me scared lol thanks for the tip. I never actually thought of it that way. Now that it’s been pointed out I won’t be able to use it. I already blew one motor on that thing using cat filters. Why take a chance
 

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,674
Reaction score
23,388
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com

I have never dealt with this company but the price is right if shipping isn't ridiculous
Thanks with that I was able to cross reference this, and JD has, Ill check in the morning as my grass is growing fast and it will be 10" tall on the weekend.

 

MP Kid

Active VIP Member
Joined
Dec 20, 2010
Messages
3,117
Reaction score
4,327
Location
East of Calgary
Well, with the original help from @sirkdev I was able to cross reference the belt, and it was a tad pricy at Martins however I get the exact one. TCU20822 V-BELT 1 $61.70 they have in stock.
So what was the price at your local JD dealer?
Assuming you bought from the site Sirkdev suggested??
 

sledn

Active VIP Member
Joined
Nov 6, 2007
Messages
415
Reaction score
727
Location
Alberta
Spares on Amazon cheap
9074aaf50053ff1589756f8be73ae71e.png
 

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,674
Reaction score
23,388
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com
So what was the price at your local JD dealer?
Assuming you bought from the site Sirkdev suggested??
I was able to get the correct part number from that website, to cross referenced, I need this weekend and that site is over a week to get what I need. It was $66 from the local dealer and I was going to order the other day from Amazon however it was 3 day delivery so I'll bite the bullet an buy the JD brand one. I already tried however there system showed several belts and I was having to go cut the one off and bring it in.
 
Top Bottom