its got the SHAKES!

note

Active VIP Member
Joined
Oct 29, 2008
Messages
1,804
Reaction score
0
Location
ST Albert, AB
So my ktm 250 sxf has a little problem and I was hopeing some of you could help me out. when I go fast (4th gear) through some bumpy sections on my bike I get this uncontrolable speed shake! its kinda scary and I wish it didnt happen. what causes that?
 

ghglenn

Active member
Joined
Jan 29, 2009
Messages
78
Reaction score
0
Location
Thorsby
Two factors. If the rear suspension's spring is too tight (preload), not enough sag, it can cause head shake to show up at high speed. The shock needs to be "in the stroke" to work well, not at the top.

Or, rider position/fatigue....Usually, this is main cause. The elbows need to be up and rider needs to be on balls of feet (attack position) otherwise, the bike will begin to get "feedback" from tired rider and start to "headshake".
Very common in desert racing, high speed over long distance....That is why most run steering dampeners like "Scotts"...


Hope that helps.
 

TheLonelyIsland

Active VIP Member
Joined
Sep 22, 2009
Messages
5,189
Reaction score
11
Location
JESUS' BEAUTIFUL TOWN OF SOOKE BC
Two factors. If the rear suspension's spring is too tight (preload), not enough sag, it can cause head shake to show up at high speed. The shock needs to be "in the stroke" to work well, not at the top.

Or, rider position/fatigue....Usually, this is main cause. The elbows need to be up and rider needs to be on balls of feet (attack position) otherwise, the bike will begin to get "feedback" from tired rider and start to "headshake".
Very common in desert racing, high speed over long distance....That is why most run steering dampeners like "Scotts"...


Hope that helps.

thats alot of info! you ride moto-x?
 

note

Active VIP Member
Joined
Oct 29, 2008
Messages
1,804
Reaction score
0
Location
ST Albert, AB
Two factors. If the rear suspension's spring is too tight (preload), not enough sag, it can cause head shake to show up at high speed. The shock needs to be "in the stroke" to work well, not at the top.

Or, rider position/fatigue....Usually, this is main cause. The elbows need to be up and rider needs to be on balls of feet (attack position) otherwise, the bike will begin to get "feedback" from tired rider and start to "headshake".
Very common in desert racing, high speed over long distance....That is why most run steering dampeners like "Scotts"...


Hope that helps.

Im thinking its suspention, I messed with it a bit :rolleyes:, THANKS!
 

GasCan

Active VIP Member
Joined
Nov 22, 2009
Messages
944
Reaction score
235
Location
North Okotoks Acreage
Website
www.oldgasolinesigns.com
Head shake can also be caused by the front forks being too low in the triple tree's and many will raise them a bit. I have mine up about 1/4" above the top clamp. If adjusting these, re-torque the top bolts at 20nm and the lowers at 15nm.
 
Top Bottom