In need of specs

[sickcat05]

hey im looking for the torque specs for the secondary clutch in my 05 sno pro i heard around 55pds but let me know
thanks

 

[macronut]

hey im looking for the torque specs for the secondary clutch in my 05 sno pro i heard around 55pds but let me know
thanks

Manual states:

Installing
NOTE: Before installing the drive clutch, be sure
to wipe both the crankshaft taper and clutch
mounting taper clean using a clean towel.
1. Place the drive clutch into position on the crankshaft
and secure with the appropriate cap screw
and lock washer. Tighten to 55 ft lb.
2. Check alignment between the drive clutch and
driven pulley

 

[Snorider]

hey im looking for the torque specs for the secondary clutch in my 05 sno pro i heard around 55pds but let me know
thanks

if you want the driven clutch I would not tighten it to 55 lbs. the drive clutch sure, would have to check for the driven.

 

[boss hoss]

Manual states:

Installing
NOTE: Before installing the drive clutch, be sure
to wipe both the crankshaft taper and clutch
mounting taper clean using a clean towel.
1. Place the drive clutch into position on the crankshaft
and secure with the appropriate cap screw
and lock washer. Tighten to 55 ft lb.
2. Check alignment between the drive clutch and
driven pulley

Correct!Just did one last week end.