I'm ready to ride

[macronut]

Well I have my new clutch shift assist installed, new Rock Rollers installed, Clutches aligned, Belt deflection corrected, Hood Vent installed to coincide with side panel vents for heat loss! BDX anti steering slop Installed, Tether installed, Mbrp can last year which I love the sound of! Greased suspension, fluids changed. Maybe time some frogskinz as it's nice to keep the engine compartment dry, other than this it's time to Ride! One year warranty is up time for another season of Deep Snow!

 

[scrfce]

Ya get the frogskinz for the nose vents, itll save ya alotta headache in the future. On deep days that snow will eventually build up between the airbox hose and bumper area then the heat from the engine turns it to ice and its a real pain tryin to open ur hood without busting somethin let alone trying to dig out or melt the ice.

 

[macronut]

Ya get the frogskinz for the nose vents, itll save ya alotta headache in the future. On deep days that snow will eventually build up between the airbox hose and bumper area then the heat from the engine turns it to ice and its a real pain tryin to open ur hood without busting somethin let alone trying to dig out or melt the ice.

I think they are a good idea for sure! Seen them installed on the 2011 Cats here in Red Deer! Friend of mine cracked his hood all to HECK from that ice build up! Cheers,

 

[gartho]

Sled looks great,soo there is some sort of kit for the play in the bar tower, both my 2009 m8 sp & 2011 m8 sp have the same amount of play,how does the kit work

 

[macronut]

Sled looks great,soo there is some sort of kit for the play in the bar tower, both my 2009 m8 sp & 2011 m8 sp have the same amount of play,how does the kit work

It's new aluminum block with bushing. Takes up a lot of slop with enough normal play to prevent the snapping of your steering post! Bushing is replaceable as it wears out eventually! BDX makes it 30 min job for me Got the side vents and hood vent from

 

[chadwik74]

Needs fuel!

 

[gartho]

Thanx for the reply have to look into it, when u put the brg update in the secondary,did u replace those crappy 6 cat screws, just doing the update on the 09,out of the nine,6 of them were bent,tight all the way out

 

[macronut]

Thanx for the reply have to look into it, when u put the brg update in the secondary,did u replace those crappy 6 cat screws, just doing the update on the 09,out of the nine,6 of them were bent,tight all the way out

I was careful i impacted them out, came out straight went in straight with some blue loctite. The more you take em in and out wears em! I'd replace em with Allen cap heads if you need to but do them all so the balance is equal!

 

[macronut]

Needs fuel!

Yup, almost finished burning last season tank out today :d:d My alley ways will never be the same. good thing I have understanding neighbors haha

 

[2manykids]

What are you using for the intake now?

 

[macronut]

What are you using for the intake now?

I'm still using the Stock intake, are you asking because of my hood vent ?