I have a 2000 summit 700 and the air filter keeps getting plugged off by snow.

[hondalrd]

I have a 2000 summit 700. and there is 2 filters right by the gauges. ones on the left and ones on the right. They keep getting covered with snow and the sled starts running like crap when this happens. but right when you clean them off it runs fine again.

does anyone else have this problem?

any solutions to this problem?

thanks

 

[boots]

get some pre filter material and cover the filters i did this with my rev and it help 100 %

 

[Summiteer]

get some pre filter material and cover the filters i did this with my rev and it help 100 %

X2 plus on my 2000 summit I took a hole saw to the empty gauge spot and put one of those SLP breather buttons in to help. seemed to work ok

 

[Alberta Boy]

X2 plus on my 2000 summit I took a hole saw to the empty gauge spot and put one of those SLP breather buttons in to help. seemed to work ok

Yup... SLP filters beside your gauges... extra air and being verticle, it keeps the snow off nicely! even in the DEEP POW days!

 

[hondalrd]

ok i will try the pre filter material. where do you get that at??

 

[hondalrd]

anyone?

 

[Summiteer]

a doo dealer may have a sock that'll fit over your filter foam. Might be able to modify the intake sock for the Rev to fit.

 

[barry]

anyone?

dont use it in the snow and it wont plug up!

 

[treemongrol]

I put 2 of the slp breathers in mine, I also don't run windshields so I find it stays alot cleaner

 

[Pappillion]

SLP has a valve that will open up and let in air to an air box when the vaccume gets too high due to blocked filters. It is in their doo section on their web page and they are pretty cheap. Looks like a peice of tin from the pic but it works well.