How hard is it to learn to use a atv/dirtbike Hand clutch?

muskeg

Member
Joined
Mar 20, 2012
Messages
5
Reaction score
0
Location
manitoba
I've never rode a sport quad or a dirtbike so how hard is it to learn? I'm 16 and i am considering getting a dirtbike, and is a 250 dirtbike to big to start on even if you go easy on the throttle at first?
 

sirkdev

Active VIP Member
Joined
Nov 2, 2008
Messages
3,272
Reaction score
5,335
Location
Stony Plain
If it takes you more than 2 minutes to master it quit and go back to an auto.
 

dezmitchell

Active VIP Member
Joined
Jun 8, 2008
Messages
1,409
Reaction score
1,024
Location
Calgary
Start with a 125 if you completely new maybe even a xr 100 or a crf 150/230. It can be tricky at first but eventually you dont even think about and is it ever a HOOT to rip thru the gears on a tight single track trail.
 

KVF 700

Active VIP Member
Joined
Mar 6, 2009
Messages
883
Reaction score
105
Location
Woking
Hold er wide open and let er buck.....on a more serious note, it is indeed like walking and chewing gum.

250 is a lot of bike. Better to get the hang of things on something a bit smaller, then get a big bike. Doesn't take long to catch on at all
 

TheMuffinMan

Active VIP Member
Joined
Oct 7, 2010
Messages
484
Reaction score
674
Location
Chetwynd, BC
250 four stroke or two stroke? 250 smoker would be a handful for a first timer. A 250 thumper on the other hand is very easy to ride and still packs enough punch to have fun on. You have to be honest with yourself about your mechanical aptitude before you decide though...modern high performance four strokes take a lot more care and they don't tolerate lazy owners very well.
 

Bandit_750

Active member
Joined
Feb 6, 2012
Messages
121
Reaction score
56
Location
Red Deer, Alberta
you will learn real quick the first time you dump the clutch and roll'er ha ha

it just takes practice. you will stall lots and miss gears. thats just how you learn. and like themuffinman said. understand your limits. 250 is a big bike it can/will hurt you.
 

Fallen

Active VIP Member
Joined
Nov 13, 2008
Messages
438
Reaction score
101
Location
Ft. McMurray
Can you drive a Standard car/truck? If you can then you'll pick it up easily. If not I would see if someone would teach you on a sport quad, that way you don't need to worry about dumping the bike. Once you figure it out on a sport quad get a bike.
 

muskeg

Member
Joined
Mar 20, 2012
Messages
5
Reaction score
0
Location
manitoba
I'm 16 and probably 5'9" do you think a 150 would be too small for me if so what would you reccomned me riding?
 

TheMuffinMan

Active VIP Member
Joined
Oct 7, 2010
Messages
484
Reaction score
674
Location
Chetwynd, BC
Yeah a 150 four stroke (crf) would be too small. What bike you should buy would depend on where you want to ride. If you're gonna be playing on MX tracks I'd say get a 125 or ktm 150 two stroke. If trail riding/enduro is more your thing, you can't go wrong with a KTM 200.
 

muskeg

Member
Joined
Mar 20, 2012
Messages
5
Reaction score
0
Location
manitoba
what about a crf230 or ttr230 would they be a good starter bike and how do they compare in power to a 250
 

mavrick

Active VIP Member
Joined
Sep 18, 2007
Messages
593
Reaction score
25
Location
Yellowknife nwt
for a frist bike and u ride trails the 230 would be fine. low mantince bikes unlike the new 250's which are great bikes just more to maintain
 

northern bear

RIP May 30,2022
Joined
Jun 17, 2007
Messages
778
Reaction score
587
Location
Barrhead, Alberta
I got an old Honda xl 500 that's a good learner. Plenty of power. Low to the ground seat so it's easy to keep feet planted. Front wheel likes to stay planted on the ground, but can and will wheelie. Old school drum brakes so stopping can be a little sketchy sometimes. It's a damn fine scary ass ride lol
 

mxzguy

Active VIP Member
Joined
Nov 12, 2006
Messages
210
Reaction score
158
Location
Edmonton
I agree with Mavrick get a 230 if you are looking for something older i.e cheeper look for a Honda XR 250/200 good and reliable trail bikes. Ride it for a season or two then upgrade to a bigger bike.
 

mb1

Active VIP Member
Joined
Oct 26, 2007
Messages
777
Reaction score
153
Location
Edmonton
There is a big difference between being able to ride with a clutch and mastering it. Really to ride with one all you need to use it for is getting going from a start, then just back off the gas a little when grabbing gears.

Mastering it is another story and requires a lot of time and technique. The pro's keep the gas pinned in many situations and use the clutch to control how much power gets to the ground. Most guys are a lot closer to the first case. You'll want to learn to use it to help you loft the front wheel over a log or puddle. Go from there.

Its fun and you'll be fine. Keep in mind you'll become a better rider if you start on less bike and learn to "ride the crap out of it". You will be able to come out of corners wide open, not be scared of looping out, etc. Believe me it sounds cool to learn to ride a more powerful bike than you can handle but it will NOT help your skillset. Most guys would buy a 450 but would likely be faster on a 250. If you watch AMA Supercross on the weekend, you'll see the big bikes are only about 2-5 seconds faster per lap.
 

-LadyDirt-

Active VIP Member
Joined
Aug 24, 2009
Messages
1,727
Reaction score
512
Location
Edmonton, AB
Umm yeah.. one fiddy.. way too small. I ride the CRF 150R, and i'm 5" and I can touch both feet, You might want to consider a 125 2 stroke, or a 250 4 stroke. Ideally, ride someone elses first to get a feel of whats too big or too small.

Oh, and learning the clutch.. easy peasy, took me less than a minute to figure it out ;)

good luck!
 

lbartels

Active VIP Member
Joined
Jul 22, 2010
Messages
274
Reaction score
95
Location
Edmonton
If you understand the simple theory of

"With the bike running in neutral, Pull in the clutch, Shift into first, Apply a bit of throttle and slowly let out the clutch all the way, Now you're moving, once up to a speed where you can pick your feet up, let off the throttle, pull in the clutch and shift into second gear, again let out the clutch while adding a bit of throttle"
same goes for down shifting, pull in the clutch, click the shifter down into the gear you want, slow down and slowly let out the clutch,

Now you're set and off riding. When you are going to stop pull in the clutch and shift back down to neutral or 1st if you're going to get rolling again soon.

Every machine a bit different with how the clutch feels, like how hard the level is to pull and the "friction point" (that special spot where you let out the clutch lever to that point where you can feel the bike start to move).

Another nice part about learning to ride a dirt bike, take to a place with nice soft dirt. Not only for falling. But for the sake if you're a bit heavy on the throttle the back tire can spin without doing a wheelie. Then comes other great stuff about shifting your weight all around.

As far as the displacement of the bike being right for you. Pick the bike that you're comfortable with its size. Just like a big bicycle or a small bicycle. If you can ride 1 you can ride them all.

The only problem is within your right wrist. A big motor is going to pull hard & fast with a small twitch of your wrist. A smaller displacement bike with respond slower and in turn be deemed more controllable.

My grandpa told me something about a bike being too heavy or having a motor with too much power " Well you're not going to picking the damn thing up over your head are you? Well you don't need to be able to lift the entire weight. Just get it back up on its wheels when you fall, And you will fall ". Also " What does the bike do when you hold the throttle steady on the hiway? Nothing, you keep cruising. What happens when you twist the throttle wide open? You're going to take off fast".

Keep that in mind.
Have fun.
Most importantly, Don't be scared. You won't regret it.
 
Top Bottom