Hand warmers

young-gun

Active VIP Member
Joined
Mar 24, 2010
Messages
388
Reaction score
656
Location
edmonton
My hand warmers don't work on sled after a couple days of riding. Once sled dries out in garage they work again. Is there a connection I should be putting dielectric grease on?
 

towerrigger

Active VIP Member
Joined
Nov 15, 2009
Messages
430
Reaction score
708
Location
Sask
Check with an OHM meter. There is connections under the foam riser clamp cover. Trace the wires to the connection. Depends on year of XM for resistance. 13's had lower than the 14's. You might have a short in then.
 
Top Bottom