DS4 Ski Template

[norona]

When you print make sure measurements are accurate in size

 

[JMCX]

Is this for some sort of modification?

 

[1100]

Why did doo go away from the ds3 to
The ds4?

 

[Caper11]

Is this for some sort of modification?

It’s the template to cut the rear of earlier DS4 to match the 2025 ski. Nice little upgrade, just make sure the template is printed off 1:1.

 

[JMCX]

The drawing should show the original shape with a dotted cut-line. I don't have a clue what this is showing.

 

[oler1234]

The drawing should show the original shape with a dotted cut-line. I don't have a clue what this showing.

Tail end of the ski. Normally it is slightly squared off. The new ones look like this on the back side. Should help in firm/hard snow conditions

 

[norona]

The drawing should show the original shape with a dotted cut-line. I don't have a clue what this is showing.

cut it out and put it over 23/24 ds4 ski and jiffy and cut, aint brain surgery

 

[norona]

Why did doo go away from the ds3 to
The ds4?

New ski for Gen 5, i did not like as it is more forward on the spindle so harder to steer and feels raked out, putting the ds3 makes the sled better on expert. but this is a way cheaper option than buying new set up and it works good