Clutch Tools

[farmerboy]

Anyone have extra clutch tools or where can you get them. I need a puller and a holder bar Thanks

 

[SidewaysInto3rd]

If you want to buy the tools, I recommend:

Or

You can make both

For a puller (only if you need to pull off your fixed sheave) use the water method. It's free and works way better than an actual puller Primary Clutch Removal with The Water Method - DOOTalk Forums

For a holder, go to home depot and get yourself the parts you see in this picture Ghetto clutch holder !! but it works
2x flat alum or steel bars either with holes in them or drill your own
2x long bolts
2x coupling washers

 

[Bnorth]

That "ghetto holder" is baller compared to mine. I just hook a tie down strap from the clutch to the bracing around the footwell and then use the water trick.

 

[farmerboy]

I made a holder. Just need to make a compressor and get a puller

 

[SidewaysInto3rd]

sweet .. that's way better than my ghetto device

For the compressor get a ready rod and some big washers and nuts... drill a hole in your work bench, attach the rod to it with 2 big washers and nuts and use another big washer / nut / wrench to compress your spring cup

and like I said for the puller, you don't really need one unless you are taking off your fixed sheave. The sliding sheave should just come off once you take the bolt out.

good luck !