Boondocker on RT 1000 starting points

[sleddinfamily]

I need help.... When I purchased my 06 Rt it came with a Digitron Dual Screen, Boondocker box and twin Crankshop pipes. I have gone back to a single with MBRP can and am looking for some starting numbers for the Boondocker Box.

 

[Rucky]

I need help.... When I purchased my 06 Rt it came with a Digitron Dual Screen, Boondocker box and twin Crankshop pipes. I have gone back to a single with MBRP can and am looking for some starting numbers for the Boondocker Box.

I can't point you in the right direction unfortunately, but you should probably specify if it is a stock pipe, or an aftermarket one...

 

[sleddinfamily]

Stock pipe with MBRP can

Thanks.

 

[Shredder]

If nothing more than a can "0"'s across the board and tweak it a bit from there. You don't even need to run the box with just a can. When I had my RT; I had a box, bro-in-law no box on his. Both running different cans, no issues with either one.

 

[Washy]

I you put the stock pipe with just a can on I would put it all to zero unless there are alot of other mods.

 

[sleddinfamily]

So, today I set all fuel numbers to zero. Am I now running at stock settings?

Sled seamed very responsive for the short time I rode it after these adjustments, Should I have any concerns about being to lean with all zero's?

 

[Summitric]

so, today i set all fuel numbers to zero. Am i now running at stock settings?

Sled seamed very responsive for the short time i rode it after these adjustments, should i have any concerns about being to lean with all zero's?

yup, you'll be at stock settings.......

 

[Shredder]

Should I have any concerns about being to lean with all zero's?

Bro-in-law (Mac22) makes some BIG pulls with his and has had no problems. If you still have your EGT's you should be able to use those and a couple plug readings to give yourself piece of mind.

 

[I'vegotthenutz]

yup i concur, no box required for stated mods

 

[sleddinfamily]

The only mods I have are the stock pipe with MBRP can and kick ass filters. I will leave the box wired in and keep the dual screen Digitron for EGT's.

So from your responses I should be alright with zero's at elevation (stock) or with this still wired in does it send some kind of false message to the computer that may screw things up.

I will watch EGT's and do spark plug test when we get to Revy.

Thanks

 

[highmark x]

What does everyone recomend for numbers with a single dynaport pipe and can? Running boss nos as well but that will be after i break the new motor in.:d