Blowing Fuse - Any Ideas

Shadlar

Member
Joined
Jul 27, 2008
Messages
21
Reaction score
4
Location
Stony Plain/Outwest Camping
I have a 2006 Outlander 800 that is blowing the 7.5amp fuse labeled ( F4 - "Accessories" in the shop manual ) - (F4 - "Speedometer/Speed sensor/Tail lamp" in the owners manual) every time I try to start it. Has anyone seen this before, and what was the solution? I only have 2 weeks vacation this summer starting on Aug. 10th and would really like to have my quad running. As a side note the last time I rode the quad it worked fine, but the speedometer did not work. ( all lights and indicators worked, digital display worked. Everything but the speedo needle. :confused:
 

Radagast

Active member
Joined
Aug 30, 2010
Messages
38
Reaction score
2
Location
Alberta
I'd start with checking continuity on your speedo wire(s). Could just be a bad ground wire.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,547
Reaction score
16,966
Location
DA Moose B.C
if its blowing a fuse it would have to be shorting out.... a bad ground won't make it blow... but if its crossed to ground then yes could blow it
 

Shadlar

Member
Joined
Jul 27, 2008
Messages
21
Reaction score
4
Location
Stony Plain/Outwest Camping
The quad is at the dealer right now. We think that's what it is but will know for sure in a couple of days. All I know is that as soon as we unplugged the sensor it worked fine and did not blow any fuses.
 

Shadlar

Member
Joined
Jul 27, 2008
Messages
21
Reaction score
4
Location
Stony Plain/Outwest Camping
Just a quick update. My wife took it in, they changed the speed sensor. I picked it up and went camping for my 2 weeks holidays and the quad performed flawlessly the whole time. I kept the old sensor and will try cleaning it and reusing it ( As suggested by DaveB ) when i have more time.
 
Top Bottom