Blew belt, now electrical problems

[sweld]

buddy of mine blew his belt on a 08 m1000, since then his back up beeper wont turn off either in drive or reverse also his ccu lite is on now, the machine still runs fine, check every where we could for any broken wires etc but nothing, any ideas? thanks

 

[mountianguy]

There is a switch on the d/d that is either stuck or has a chunk of belt in it. Its kinda hard to see but if you look you will find it

 

[jncmcat]

did the same thing to my m8, selenoid for the diamond has broken wires from the blow out, unfortunetly you will have to replace the selenoid, you might not see where the wires are broken, but they are shorting out

 

[sweld]

thanks guys we will check that out