Assault & Dragon Front Suspension

[SLED SLUTZ]

Need to know if I can bolt on front suspension from a dragon on my 2010 assault so that I can narrow up my ski stance.

Doable?

 

[theunit1]

Not a option ! change a arms and the whole works larry

 

[SLED SLUTZ]

#1. Whats not a option?
#2. Im glad I now know that A-Arms are part of suspension now. Wheew...
#3. Thats what my questions was... can I bolt on "the works" to my sled...
.....Larry.

 

[OnlyPolaris]

yes you can. the mounts for the a-arms are the same. You may have to get shorter tie rods but you may be able to adjust the stock ones in enough. you would also have to make sure that you put the dragon shocks on because they are shorter.

 

[SLED SLUTZ]

I took a quick look at the rods and it looks like I may be able to adjust them in enough to make them work. So if I were to do this, I would have to replace the A-arms obviously but I would also have to lose my walker evans??

 

[assaultn]

I just did exactualy what you want to do but went with a zbros 40" kit and Exit x1 shocks. I found a guy that was able to get the whole setup including steering rods for 1350$ shipped to my door and can do the same kit with the x0 shocks for 200$ less.

 

[OnlyPolaris]

I took a quick look at the rods and it looks like I may be able to adjust them in enough to make them work. So if I were to do this, I would have to replace the A-arms obviously but I would also have to lose my walker evans??

ya the assault walker evans are 1" longer. techincally you can use them but it will lift the front end of the sled and totaly change the geometry. Plus your ski pressure will drop.