2023 Expedition 900 Ace

[Grizzly4323]

Reverse beep is way too load when in the bush. First, where is the alarm located and anyone disconnect or even muffle the load beep?

 

[greenthumb]

Not 100% sure about the expedition, but on their other sleds, the beeper is in the gauge. Pop it out and look for a small hole in the back. 3/16" ish. It may be covered by a mesh. A piece of tape or dab of silicone should doo the trick.
If you're feeling adventurous, you could open it up and disable it completely. Its a little round plastic deal.

This is what it was on the xp/xm gauges.

 

[Grizzly4323]

Expedition G4 is a bit different as it’s a sealed assy. Plugged and taped beeper. Still beeps but less annoying.

 

[greenthumb]

Expedition G4 is a bit different as it’s a sealed assy. Plugged and taped beeper. Still beeps but less annoying.

Those were the pics I could quickly find as an example.
If you fill the hole with silicone, it should have more of an effect. Stuffing a foam earplug in there might work too and be removable.
It's a thin metal disc that is a piezoelectric speaker. it doesn't take much to silence them.

Potentially, it could be disabled by a dealer. They may have some "safety" concerns tho.

 

[mxz800x]

I get a kick out of all the Polaris guys who hit the throttle,thinking they have the sled going forward ,when in fact,it is still in reverse. No beeping. Lmao. They sure wish they had a beeper like a doo.

 

[skid]

I get a kick out of doo guys cause they can’t find the hole to stuff it to shut her up

 

[Clode]

I get a kick out of doo guys cause they can’t find the hole to stuff it to shut her up

Holy phuck, I busted out laughing when I read this....so good skid