2013 Polaris Sportsman 500 Bogging issue

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,073
Reaction score
43,152
Location
Sherwood Park, Alberta, Canada
Went to go plow some snow on the weekend and the machine just bogs out under any sort of load. really have to manipulate the choke to make it run and even then its not quite right.....drained all the fuel and put fresh premium in, ran for 30 mins and no change. Its been in the heated garage so nothing is frozen. Fuel filter maybe? it must be starving for fuel if it gets better with choke? In neutral i can almost get it to rev up if i manipulate the choke but then eventually it dies out again.

this is the only vehicle ive ever had where you can park it in perfect working order and then a new issue arises the next time you fire it up
 

Trashy

Super Moderator
Moderator
Joined
Nov 16, 2008
Messages
132,531
Reaction score
104,816
Location
Fort Macleod
Try some gas line antifreeze in it and possibly green death in the carb, if you're having to choke it that much
 

Cdnfireman

Active VIP Member
Joined
Sep 11, 2012
Messages
2,726
Reaction score
9,529
Location
Alberta
Fuel filter is a good place to start. Obviously a fuel delivery issue if cutting the air off makes it run better. If that doesn’t work I’d pull the carb off and blow out the guts. Might be a piece of crap plugging up a passage or jet....
 

Bezzola

Active VIP Member
Joined
Feb 10, 2009
Messages
519
Reaction score
471
Location
edmonton
That is why i sold my wifes polaris always had issues. The last bogging issue i had was the boot between the carb and engine was cracked.
 

Rhodesie

Active VIP Member
Joined
Mar 11, 2010
Messages
2,079
Reaction score
6,934
Location
Medicine Hat, AB
some machines the clip on the jet needle falls off. they vibrate so much it wears the groove that the clip was in. get rid of it and buy a brand new can am.
problem solved.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,073
Reaction score
43,152
Location
Sherwood Park, Alberta, Canada
some machines the clip on the jet needle falls off. they vibrate so much it wears the groove that the clip was in. get rid of it and buy a brand new can am.
problem solved.

LOL i sense the sarcasm. Thanks i will check that out forsure has to be something like that.
 
Top Bottom