Hey guys need some help. Just pulled my sled in garage this morning and was letting it thaw. Went out this afternoon and there is small puddle of fresh 2stroke oil under the sled. I start looking and I see fresh oil sitting on top of the cylinder on the chaincase side. Start pulling sled apart and get the dash off and find the oil is dripping from the check valve. Never had this happen before so thought I’d ask the wrench gurus here if they have any ideas? Do I just replace the check valve? Or is there something more going on? Something else I should check on?
A little info in case there are other questions. Sled has 2300miles, ran like a champ Saturday. Did 28miles of mostly tree riding Saturday in N Idaho. No stucks or roll- overs. Did top off oil and fuel when I returned to trailer Saturday evening. Sled started right up this morning and let it warm up a bit before backing into garage this morning. Thanks for any help guys.
A little info in case there are other questions. Sled has 2300miles, ran like a champ Saturday. Did 28miles of mostly tree riding Saturday in N Idaho. No stucks or roll- overs. Did top off oil and fuel when I returned to trailer Saturday evening. Sled started right up this morning and let it warm up a bit before backing into garage this morning. Thanks for any help guys.
Last edited:
