2009 polaris engine light flashing need help!!

dglionna

Active member
Joined
Apr 26, 2010
Messages
31
Reaction score
0
Location
range road 25. AB
Hey ill be riding my dragon and if am riding in powder all day its runs perfect but its on the trail coming down for the mountain my engine light will start flashing and wont stop flashing and goes into limp mode but ill shut it off then turn it back on and its good. No temp light or anything comes on but if i just hold it at a quarter throttle it wont do it.. its just if i nail on the throttle.. If anyone had this happen please let me no it would really help me out
 

moto5151

Active VIP Member
Joined
Jan 4, 2012
Messages
509
Reaction score
277
Location
grande prairie
Sounds like a detonation issue. The blinking lights is in a set sequence. Figure that out and call your dealer. Maybe it's not allowing the fuel controller to compensate for altitude. Leaning it out.
 

dglionna

Active member
Joined
Apr 26, 2010
Messages
31
Reaction score
0
Location
range road 25. AB
Its not leaning out checked plugs and there good i have the pms fix kit in it and slp full exaust just incase that has something to do with it but its only on trail when am playing around and climbing and stuff it doest do it untill either coming up or going down on the trail
 

Audette13

Active VIP Member
Joined
Dec 24, 2008
Messages
335
Reaction score
273
Location
Edmonton
i have the fix fit and slp stage 3, i had DETO issues(same as you are describing) on the trail rides up also , i have corrected these issues with about 15-25% av gas per tank. you may not need as much with out the hi comp head.
 

Like2GoFast

New member
Joined
Mar 4, 2013
Messages
2
Reaction score
0
Location
Ontario
If u turn it off and then restart to clear the fault, you could have a faulty sensor. If there was a real problem, shutting it down wouldn't clear the fault. Gotta get it to a dealer, so they can put the computer on it and find out what fault code is coming up. Sounds like a similar problem to mine. Let me know how it works out.
 

Audette13

Active VIP Member
Joined
Dec 24, 2008
Messages
335
Reaction score
273
Location
Edmonton
sledtillded, i forgot that point, i believe you are on to something there, the fuel controllers work wonders for these engines even with just the pipe
 

moto5151

Active VIP Member
Joined
Jan 4, 2012
Messages
509
Reaction score
277
Location
grande prairie
When those machines detonate, the ecm derates the eng. If you shut it off, and restart it, it will reset allowing everything to run perfect again until it detonates again.
 
Top Bottom