1999 polaris rmk 700 ?

[BCsledder]

Now that the 1998 SRX is out of the question I found a 1999 rmk700 with a 136/15/2", SLP pipe and can, and a lightweight hood for 2300 OBO. I was wouldering if it was a good price and if there where any cheaper mods that i could aford (I am 13).

Thanks
--------------------------------------------------------------------------

nevermind the post above the 700 sold, i didnt feel like making a new thread so i added to this one.2000 RMK 800 for $2400 just wanting to see if that is a good price and some other info.

Thanks(once again lol)

 

[boondockin]

Now that the 1998 SRX is out of the question I found a 1999 rmk700 with a 136/15/2", SLP pipe and can, and a lightweight hood for 2300 OBO. I was wouldering if it was a good price and if there where any cheaper mods that i could aford (I am 13).

Thanks

i picked up an 01 doo 800, its got a 151 with hps can and a 3 inch riser for 1800 down here in montana, how many miles are on it?

 

[BCsledder]

i picked up an 01 doo 800, its got a 151 with hps can and a 3 inch riser for 1800 down here in montana, how many miles are on it?

Im not shur how many miles it has

 

[dooryder]

check how many miles are on it, and the rmk 700 is a great sled, lots of power for you that track is nice too, those sleds will take a beating and keep on kicking, My friend has one and it goes good, he put some V force reeds on it and it made the throttel a lot crisper and it cost him around 300$ for those, but let us know on how many miles it has

 

[BCsledder]

denied again. My cusion went and looked at it today for us and it has a home made hood the tunle swaped out seat, piped, can in one word its a mod sled.My dad said i need a stock sled or closer to stock.

Thanks for the help anyway guys

 

[Uturn]

The 99 700 RMK's are a great sled. I'd keep looking. A lot of them are modded to some extent to keep up with the 800's that came out later. The 99's have the traditional sytle Polaris seat, and the 00's had the new style. Otherwise they are the same. Try and find the 2" track over the 1-3/4".

As for performance enhancments. They need the boost bottle to clean up the throttle, good clean clutches (a cat roller secondary (cat yellow spring and straight 49 helix) is the best and a cheap upgrade), SLP single and can is the best bang and very reliable. Jet down one size and you are good to go.

I put a lot of mountain miles on mine, and the only damage to it was my fault. Great starter sled.

 

[BCsledder]

The 99 700 RMK's are a great sled. I'd keep looking. A lot of them are modded to some extent to keep up with the 800's that came out later. The 99's have the traditional sytle Polaris seat, and the 00's had the new style. Otherwise they are the same. Try and find the 2" track over the 1-3/4".

Ya i just looked in the clasified section ( my favorit section) of the paper and found a 1998 rmk700 with a 144 by 2' and slp pipe. My cusion will hopfily be taking me to look at it tomorrow

 

[BCsledder]

1998 rmk700

We look at the led yesterday. It has carbs off an M7 SLP pipes and one big riser wouldering how good of a sled it would be didnt check the miles cuz the guy runs it with the tac off. Any help would be great thanks

 

[SLEDBUNNYRACING]

I have a 99 RMK 700 with SLP twin pipe, Vari-Flow and is extended to a 151" track with a LED light. That sled is extremely reliable.

 

[Uturn]

Re: 1998 rmk700

M7 carb's is unusual. Great thing about twin pipes is you can quickly pull the plugs, remove the pipes and get a great look at the pistons. Check both cylinders for compression(should be within 10%).

If the price is right, and it checks out, it should make a great starter sled

 

[BCsledder]

Re: 1998 rmk700

If the price is right, and it checks out, it should make a great starter sled

He is asking $2500

 

[dooryder]

Re: 1998 rmk700

that price sounds pretty good, get some one thats a very experirnced buyer to have a good look for you,

 

[Rucky]

Re: 1998 rmk700

M7 carb's is unusual. Great thing about twin pipes is you can quickly pull the plugs, remove the pipes and get a great look at the pistons. Check both cylinders for compression(should be within 10%).

If the price is right, and it checks out, it should make a great starter sled

Maybe I'm missing something, but why can't you do that with a single pipe?

 

[dooryder]

Re: 1998 rmk700

cause for a single you would have to remove the Y pipe, its bolts not springs so it would be harder

 

[Uturn]

Re: 1998 rmk700

cause for a single you would have to remove the Y pipe, its bolts not springs so it would be harder

That's right:d

 

[switchbackfst]

be very carefull with a 700 popo that has twin pipes my old one and his buddies didnt like them .........cost an engine job even with jetting

 

[BCsledder]

2000 rmk 800

well after we look at it we decided we were going to phone the next day and set a price and time to get it, but when we phoned it had sold.

yesterday in teh paper my dad found a 2000 polaris rmk 800 for $2400, he said he probily phone about it today and arange a time to look at it ( i know iv asked this a lot in this thread but) any info on the sled would be great

Thanks

 

[dooryder]

Re: 2000 rmk 800

i ride a 2000 rmk 800, and they are an exclent, the crank went on it at 2500 miles and dad replaced it and now it has 6000 miles and still pulls hard, and the liberty power plant thats makes plenty of power for a stock machine, we have SLP twins and they work great, put a vari-flow on it so we dont have to fug around with jets, all i know is 2400 is a good price, well depending on miles and shape

 

[BCsledder]

i have changed the thread(kindda) i wish i could change the name but i dont know how to if you can that is. 2000 RMK800 $2400 good price? any ifo would be great to.
thanks

 

[chateaumau]

Re: 1998 rmk700

Hello everyone - I'm a newbie with a 1999 RMK. I'm looking everywhere for a used seat cover for it. Do you know where I could find one? The sled is ready to go, but I'd like to replace the rips in the seat..oh yeah...and need snow!!!
Thanks!