07 rev 800r

[ZIG]

I am looking at buying a crankshop singlepipe an y pipe by dyna port. Has anyone tried this. If so is it worth the money.thanks

 

[HagmanMod1]

on my 07 with an 860 kit i run a dynaport y pipe and a single with a specialty can seems to work really well, on my 03 i ran a crankshop pipe it worked well but required more tuning than other pipes just my 2 cents

 

[Slamnek]

My 05 works perfect with a single crankshop and an MBRP can.

 

[OVERKILL 19]

My 05 works perfect with a single crankshop and an MBRP can.

Same on my 06, very happy.

 

[HagmanMod1]

on my 07 with an 860 kit i run a dynaport y pipe and a single with a specialty can seems to work really well, on my 03 i ran a crankshop pipe it worked well but required more tuning than other pipes just my 2 cents

the pipe did work well was just finiky to tune was probably just the sled

 

[BigRed800]

I have a dyna port can on my 05 renegade its got some noise to it

 

[ZIG]

well i broke down and bought ceramic coated singlepipe dyno port and the v force 3 reeds. do you think i will need to add pin weight.

 

[rwjk0]

Here is what DynoTech Research came up with for numbers 800R

Main Jets- 450

Pipe Y-Pipe HP

Stock Stock 149.1
Cpi Stock 146.2
Aaen Stock 148.2
DynoPort Stock 150.9
DynoPort DynoPort 153.1
DynoPort BMP 153.0

I ran a 926 BigBore a couple years ago and on NPP's dyno the v-force gained a full 6Hp
Being a stock bore you may expect to see smaller Hp gains.