06 800 151 clutching and gearing

[SaskSummit]

OK
I have an 06 adreniline 800 151. The sled works great but always left wanting more. It has Stock clutching and I have dropped the gearing down a bit to 20-45. I can only holds 41 MPH track speed give or take a couple.
I weigh about 195 before all my gear. I have been told to put in a spring with more finish preasure and throw maore wiehgt in it?
I have also been told to drop the gearing to 20-47. It holds 8000 RPM so that isn't the problem.
I would like to know what has worked for others. Facts would be best but certainly open to suggestions.
Thanks

 

[krazy ken]

On my 04 Rev, geared it at 19/45, 38-44 helix with Doo's roller secondary[upgraded, not sure if 06 is roller or not], stock springs with 16 grams arm weight on primary. Worked good until 2' wet powder on hill. Geared down to 19/47 as to what BC guys recommend. Sled has 159 so maybe your gearing should work. Sled has much better back shifting with roller secondary.

 

[Pappillion]

call Tom at Mot's Machining in St. Albert. He sells a clutch kit that works well. I can't remember what it is called but it works well. It hooks up great. It costs roughly about 385.00

 

[krazy ken]

Just rode Frisby today. Wick powder and clutching was working good.