05 M6 diamond drive oil

Catboy

Member
Joined
Nov 3, 2010
Messages
14
Reaction score
0
Location
Cold Lake AB
Just wanted to know how to change the oil? there is NO fill plug on the outside under the secondary just a drain on the inside. So after I drain it how do I fill it? Thanks :confused:
 

TROLLCAT

Active VIP Member
Joined
Nov 23, 2010
Messages
71,391
Reaction score
39,270
Location
Dease Lake BC
there should be oil level plug about 2 inches from the bottom, lay machine on it's side filler up, remove secondary clutch to do all this don't lose any shims
 

Catboy

Member
Joined
Nov 3, 2010
Messages
14
Reaction score
0
Location
Cold Lake AB
So your telling me I have to remove my DD to replace the oil in it? does sound right but I have hear weirder things.
 

bushbikeyz

Member
Joined
Nov 28, 2010
Messages
7
Reaction score
0
Location
Salmon Arm
On the inside of your DD by the drivers you will find a bolt. This is the drain and fill area for the DD. Its stupid and messy but the only way to really do it. Remember that 3oz go back in!
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,667
Reaction score
8,146
Location
Stettler Alberta
So your telling me I have to remove my DD to replace the oil in it? does sound right but I have hear weirder things.

There is a flush fluid you can put in after you drain the oil out as well..Pour the flush in,and turn the track a few times and then drain the flush.and fill with the proper oil and to the proper level.
 

Catboy

Member
Joined
Nov 3, 2010
Messages
14
Reaction score
0
Location
Cold Lake AB
Thanks for the info boys. Now I need to go to a friends house to do this and not the back yard. :(
 
Top Bottom