Search results

I took the primary offof our other 2011 pro and installed it on the 2013 and the jerking was not there, so it is the clutch, will install new bushings and buttons

IT was on of the wire plugs that came apart down by the primary clutch, the retainer clip is broken off, so I looped a zip tie around it now, will not come apart again.

Your front track drive shaft wore down on the left hand bearing side ? you replaced drive shaft and sled had this shutter/ jerking at low speed ? and are you saying the you had to rebuild the primary engine clutch and this fixed the shutter/jerking at low speed? was your primary hanging up, not...

I did check the primary clutch, wieghts, rollers are good, but the primary clutch is hanging up once in awhile ( it just started doing this), it will not totally disengage, it sometimes hangs up on the last 1/8-1/4 of an inch, shut the sled off and within 20-30 sec. it snaps open the rest of the...

I thought about the engine drive belt having a burnt spot in it, so I installed a new one , no change, track alignment was good

OK, thanks, what plug, the one for the hi/low ? the dash itself is working, I will check every plug in

Hi, we have a 2011 pro 800 and the headlights stopped working, no high or low beam, no high beam indicater, the head lite bulbs are good, the dash works and it lights up, is there a fues or something simple?

My sons sled front drive shaft failed on our last trip last year, the drive shaft itself worn down on the left side and was moving in the bearing inter race, the bearing it shaft was good, so I got a used front drive shift from a junked 2013, installed new bearings and installed the drive shaft...

Whats the snow conditions at Quartz ?

Just wondering if there is a way to remove broken cover bolts, they broke off right at the treads about 1inch down ?

THANKS FOR THE OFFER, BUT LOOKING FOR THE FRONT SHOCK ON THE REAR SKID

Hi All, I am looking for replacement shocks for my two pros, one is a 2012 pro 800 163 track other is a 2013 Pro 800 155 track, will shocks off of a 2017 pro RMK work?? if not up to what year will work? thanks for any help

Yes VP C12 is leaded fuel, I use a product call decklen ( not sure on spelling, will check tonight) they use it in aircraft fuel, it neutralizes the lead once burnt and does not kill you A/F sensor

Dose the Eagles Parking lot have Gates on it that are closed and locked , May be getting in really late or early morning hours, ma just pull into the lot ?? Thanks

Thanks tex , as for the new road into the lot I don,t see any info on the web site about this, do you still turn off the main highway at the same spot ??

So is Eagle pass being logged this year OR are you staging from the bottom main parking lot ??( big enclosed trailer ) Whats the now like on the lower trail ?

Was out last weekend , first time in 2 years and we had decks , love my trailer , but as you say , good for longer trips and parking in the main lots, looks like you just got a fresh dump

Come om Tex78 , my trailer is a 39 foot enclosed ;)

I run a 2013 pro 870 Big Bore , ViPec ECU and a slp pipe and the thing can ( this can was the only one that would flow enough to keep the pipe back pressure down ) If i Had the money ( !ucking Canadian dollar ) I would be try these out , I think they would liven things up

Thanks ,yes i found 4 places all in Edmonton 1) Bel Engine Service 2) AMS Engine LTD 3) Wheel Works 4) Cycle Works