Search results

i know better then to trust either one lol. but you lied tome the most modman lol. this area is great but work is very very slow lol,.like %90 reired now lol. i guess its a good thing. more time to drink beer and think of all the good in life lol lol

when you going to bring that tank out here?, we need some more trees mowed down. i have not done a good job this year lol. i guess when the riding is to close to home you just think tomorrow will be better lol

talk to trent about head shim, he may have one in stock. i would not stack the gaskets. hokey pokey crap, get shim and one new head gasket, cut the clips holding the 2 halves of gasket together, get some "spray tac" from "3m" at your local parts place and spray the piss out of both sides of...

you melted your secondary too lol lol. thought it was only my dumb luck. I think next time i have it apart i am going to take that shockwave out and try it stock again, it seems to jam open when it gets warm. we see, season is almost over and i just dont care to piss with it too much anymore...

i do believe you are correct on all your comments there. You may want to run little less then 50-50 as it may run like crap. i have tlked to guys who have run 50-50 and say runs bad. at 6psi, you will need the fuel for low. when you get up in altitude you can even run that on pump.. i melted my...

shawn dont run the small pulleys,. fraser has my old stage 1 no head shim. his runs good and hard. i have a drum of fuel for ya if you need. my cost is 500cad

burnt toast- i do not have any pictures of the install. i had my s/c kit completely insalled and then i held the bov in position where would clear and had a bud mark the tube for me. then we ground down the flange the bov came with to make it fit better. welded it up and drilled the center hole...

yes if i remembeer correctly it is the larger diam short spring. leave the long skinny inner spring in it.set screw to just touch the disk

Yes they are nice valves. And they work. Just take the spring out and set the screw so it just touches. And you are set. Get the bung welded then drill the center out. It will weld much better

free room and board here i dont know man. lol I could see what i can do but it wont be this weekend. once you come out here and ride it would be hard for you to go anywhere else.lol no one comes so fresh all day everyday shhhh oops

go to lordco in your area they will most likely have it

You are correct about the sensors and lead. They will generally last a season, most people get their settings within limits and then either disconnect the sensor and take it out and only use it if they experience a problem, or leave it in and kill it. either way new sensors are only 80$ cad at...

ya it works great. go to the thread about "IJUST BOUGHT A S/C SLED NOW WHAT" i explain the complete set up and the valve. when you going to bring the tank out. we are having an epic month.

go back to mopack and get gauge cups or pods, they are black steel cups with rubber seals for the wiring. install them under (around the bottom) of your gauges. silicone the openings and you should be good or better. mine still fog up once in awhile but not often. try that and see what...

I just found your message to me lol. ya i get stage 2 and its been pretty good and a pain in the ass. oh well maybe next year we get it working better or sell the old hore. it has been a ch!t winter everywhere but has been good here because no one goes sledding here or not as many. we could be a...

it is the 50mm yes VM 50mm Adjustable Blow Off Valve w/ Adaptor dont buy the relocation kit as it would only work for the turbo aplication. s/c are totally different in the way you want it to start dumping boost. just get the valve and you will be set.

I had mine welded at a local calgary welding shop. just find some one to tig alum weld it into the charge tube under the bulk head. this will take some measuring and fitting before you weld it. Then after the bung was welded i holesawed the center out. it is better to do it that way so if there...

This statement is for what the government is trying to do by putting avi warnings up on local news,, As far as i am concerned everytime we venture out in the back country, we should always consider the worst for conditions, stay alert regaurdless of conditions how minor or major they are. I did...

If we all want this letter to get places... everyone send it in to the newspapers, if everyone in all teh websites send it in they may have no choice but to publish it. Just an idea

I hope you do not mind but i sent your letter off to the Castlegar newpaper, asking them to publish it in the next paper. will keep you posted if it comes. Thanks again for the letter is great.