Search results

Thanks I finally got time and decided to fix the problem myself. I took 2 pieces of 3/4" round steel 13 3/4" long and inserted into the pipe diff supports, then welded the ends,( must remove wheels and top A-Arms) then I ground out the cracks and exposed the solid rod and then welded the cracks...

Has any heard of replacement supports or brackets for a rhino rear diff. I have broke the brackets holding the rear diff 4 times and the supports are so bent and cracked that i would like to replace with something better. Just checking to see if there is something already made and out there...

To the Top

Thanks, but I was actually referring to the front shock springs, sorry for any confusion.:beer::beer:

What Front Shock springs to Use on Renegade 800 with 29.5" Outlaws? I have heard people are putting on stiffer springs but what exactly are you using? Thanks in advance.:beer::beer:

Being from the area, I would be running insurance and registration, as Terry said better to be safe than sorry.

I agree, this is the easy way, but I also clean the clutch's.

Re: Mayble lake The road is not plowed in the winter, so you must take the long way around. I found it only to be 15 to 20 minutes difference in the summer taking the long way, but the short cut is more relaxing. We tried the short cut last May Long but at the highest point there was still 2...

Bar extensions are a must.

Re: Mable lake Check this site out as they rent condo's for owners and you can ride LaFarge right from door step. No gas station there so take fuel or run to ashton creek approx 20 km for full and booze. And golf course restaurant is open weekends I believe. I will be there that weekend as we...

After riding the Whitecourt poker rally on the weekend I realized that there are a lot of people with no "IDEA" what Sledding Code of Ethics are. Slow riders riding down the middle of the trail, they never look behind them, riding side to side. I hate to say it but a lot of the groups that hog...

In answer to a few questions raise in this thread, If you are going you better make reservations for spots as in May and June it is usually booked pretty tight. A great place that we stay is Sandhills resort. They have a website that will give you a lot of info on the dunes and a topo map with...

Quadtrash Your welcome hope any of this helped. Also the reason I went with a furnace is so during the summer when quadding if the Kids want to stay together, instead of setting up tents and all that crap they can campout in the enclosed with heat, lights ect. and we the adults do not get...

You will need the door you can't remove the control board or get at the gas valves without the access through this door. The door is about $60.00.

Cant remember his Name but he is a one man show in Sundre. I bought the heater on ebay for $170 + $70 shipping. Then his bill for all the labour and parts was $650. This also included the battery, battery box, new side wind jack, 30lb propane bottle, regulators, tubing, hose, wiring...

I had my Local RV mechanic install mine, It was a 35000BTU Atwood furnace. Installed it for 3 hours labour, which included mounting bottle and furnace, running gas tubing, installing battery and wiring the thermostat and all the wiring was installed behind the panel. Sorry but that was...

Where are you located

HOJO is the Howard Johnson Hotel. Thanks for the info.

Was just wondering how the snow conditions are and what to expect at the rally. Also do we need to book tickets for the freestyle event? We got rooms at the HOJO, just wondering if that is a decent place to stay? Thanks

Farm_Boy Checkout some of the other Off-breads that are made in the USA. Reusch is one I believe, seen it at the Calgary Sled show, similar to a Rhino but built a lot stronger and with more clearance and bigger motor. Also Joyner (Seen at the Edmonton sled show) makes a few sport models now that...