Search results

I never tried but at the top of the big hill before you go down to the river is where it is dug up and covered with trees.

rocks are all around the unloading area , they don't want anyone camping I there. The trail down to the falls is not pass able now, they dug It up and covered it over with trees. People don't want to follow the rules and are going to ruin it for everyone else.

yes paved alley

I see you are running a Dynatec CDI did that make a big difference? I did all that clutch wok already, maybe the clutch sheves are slippery after cleaning. I guess I need to take it for a ride.

who has or has had a brute? I have put in a dalton clutch kit for 28" tires thinking that with 26" it would pull the front wheels, no luck. it is a 2013 650 with only 1000k on it, new belt, snorkeled rad relocate kit 2" lift but just wont pull the front wheels. Is here some thing that I'm...

I know we have talk about tires before but just wondering what the weight of 28 gorilla silverback weigh and your take on them silverback or outlaw 2 outlaw1 the tread is to close

thanks for all the help, it is running. I think it should be fine. I need a rad relocate kit and a snorkel kit. Did do this to yours? I'm just wondering how to seal the cover that covers the carbs, silicone or weather stripping.

my machine is carb does this matter? did you se sea foam? I hung my quad this morning an a lot of water came from somewhere but not from inside engine. It is siting on its wheels now and now waiting to see if any thing else comes out. Did you use diesel oil to clean out the engine do you have...

clean river water, it took a big drink. Because when I opened the oil fill cap, the oil just started to run out. It as black but after the long tow, the oil tuned white and foamy thick. I' not sure if it went in the tailpipe or carb, but I herd it being sucked in by the carb. And by the time I...

R U saying this quad is junk now. Even after all the oil changes

I don't have any pics of quad, and I'm not sure how to get to the back plug, because I can't even see it. There is no pull rope so I guess you want me to turn it over with out the plug wire on right?

what is the best way to get rid of the white oil that is in the engine. I'm draining it right now and have not tried to start the quad at all. There is no white milk in the oil filter. I only have 1000 km on it so I don't want to make it worse, if I can help it. What do I do?

Ok now this is what I was thinking is that maybe the clutches are not lined up properly, what do I look for and how do I align them if they are out. I'm thinking that the primary is in to far and the secondary sticks out to far. There is a thrust washer on the secondary but I think that the...

My tires are Kenda bear claws HTR 26" and I have no problem turning them. It will pull the front wheels and it will get to 90km with out any problem. What is a tyrexbelt? is this a stock belt? and I haven't really done any hard mudding with it, I play at Mclean creek and bear beary Breaking in...

I have a 2012 650 brute force, it only has about 800km on it and I have gone threw 3 belt now. 1 stock and 2 xtx dayco belts. I did fine a piece of belt in the secondary clutch and removed it and changed the deflecton to 22mm from 28 which is suppose to be fine, any other ideas?

I bought a 2012 650 and it is carbureted can I snorkel it or is that a lost cause. I notice also that when I 'm in deep water it will stall but will start right back up . Have you ever herd of this problem?

does any one ware a neck brace for quadding? what type do you use? I think I got whiplash the last time out and a friend of mine got the same thing in the summer. I thought he was just a baby,but now.

More than likely it will be the rings and the cylinder coating will be worn out. new cylinder, rings, and possible piston will need to be replaced oh yes and gaskets. That is a lot of money to be put into an old quad good luck

they wouldn't sell everything if there was another person taking over the biss, they r selling welders laths tire changers everything

after it is all cleaned put a rad relocate kit on and your machine will love you