Search results

Hey showtime, This is our lttle piece of Heaven On Cluculz lake. it is about 50 km west of PG. very nice lake about 14 miles long with about an average of 1.5 miles wide. very deep, about 750ft out from the cabin it can be up to 250 ft deep. Lots of cabins on the lake from the 60's and 70's...

Posted my new build already but for a little change of flavor thought I would post some pics of this last summers reno. New roof, new windows, Hardie board trim, fence, deck, bathroom, septic, water (lake), RV pads (guests)and Kitchen. I thought the list was getting smaller but every time I look...

I Know the Sled is sitting behind the Boat and I should be doing the once over on it, but started playing around with L.E.D.'s in the cup holders and under the cowls on the Boat instead.

Omg!

What song? My ears quit and transfered to my eyes. that is the best natural hang it out vid i have seen in years!!!!!!!!

I did SPI pistons. they made it one ride (actully 3/4's of a ride, towed back to the truck). I went with RK tek Pistons and head with 14:1 inserts. I can feel the mid range is stronger. If you are not doing the crank pull the primary clutch (complete) and remove youe PTO seal and cover. Check...

Did the previous owner run it with just the mesh? If he did I know why you got a good deal. no compensation line and no Air box sensor. That baby was likley overfueling like heck and runing like a bag of ............... is the sensor tied up somewhere? is the comp tube hanging in there somewhere?

07 Summit X. REV.. did you get such a good deal on it you slapped down the cash not being really sure what it was? Make sure that Air box does not have any residents in it before you put it back on.

WOW, can't ever recall buying something not being sure of what it might be?

He is a quick no wire cut option. Can be put back to Factory if desired. I removed the switch assembly from the bars. I mounted the back of the switch group to the riser. 2-3 small screws through the back cover of the switch and pre drilled the holes in the riser. . mount the back plate I could...

Jeremy, I have a friend that is boat shopping. Trying to talk him into a wakesetter like mine but he won't go there (yet) send me some info on your boat as he wants the family crusier open bow (19-20 ft). give yr, lenth, options, lay out, trailer Etc. and $$$ Thanx Chris

Yah, get some grease as stated. I have done in an ECM second season due to mositure. All the snow over the hood sits and when you stop it melts runs down the hood and drips through the hood vent right on that main conector to the ECM. Corroded a couple of prongs right off. I made a bracket and...

here is my spare. I have an 06 and only one relay. I think 05's have 2 relays. I can't be sure as we have 05, 06 in our group and a mix of electric start and pull your ass. I have seen 2 relays before but can't peg which machine.

5-6 bucks at NAPA, Lordco, buy 2 and put one in your pack, I don't think it is your stator unless it is electric start, if stator is dead no sparky sparky to coil and plugs. If it is elec start it will run off the batt for a while. The most common is the relay. KISS?. cheers.

i Carry a spare as I ride with 4-5 revs. Mine is an 06 X with electric start,

I was looking at the same thing a couple days ago. Was trying to put the floor plan together in my head but that sure made me wonder?????

a few more after we moved in.

it is vinyl. tripple 4 inch. We had planned on Hardie board but that was one of the cuts in the dream big and come back to reality mode. It was $8000 extra to do Hardie so we cut that from the build. we cut back on the Stone on the exterior along with Granite counter tops. We can do the tops...

2000 Sq/ft up, 2000 sq/ft down. walkout basement. 9 ft basement, 9 ft upper on .98 acre in PG. 1250 sq/ft Garage tripple on the front and 50 ft deep on the 2 right bays. side toy garage door at 30 ft mark. 600 sq/ft rental suite with private drive way. Finished the front land scaping but I have...

against my better judgement..... me...