Search results

Any pictures of how they are mounted on your high country as I would like to out a set on my wife's HC.

Where can I get a set of these warmers you talk about?

Thanks guys for the info. Looks like I have both side to side and front to back so looks like I will be doing both jobs.what is involved with and how do you get to the bottom bolt to see if it is loose and tighten if needed?

Guys, what can be done with the steering slop on my 2016 M8000 Limited? It is very frustrating with the amount of movement it has. My 14 HCR is solid.

getting the 1100 ready today and when I removed the hood I found a hose from the intercooler laying on the heat shield. I assume it goes over to the middle electrical box with the spigot?

Had a great 3 days of riding lots of fresh untouched areas each day. Forgot how big the area was

Looking at heading to hunters from March 7-11. Any updates? Been several years since we have been there.

Any updates for this weekend?

Just wondering what they are made of? I did mine out if abs pipe and it runs for hours without issues.

Looks like awesome snow. We usually ride down south Fernie area but we're thinking of coming up here for a change in scenery. Where would be the best spot for a family to spend a couple days in the snow. Nothing to advanced as a couple are new to the mountain riding. Also what hotel would you...

Just had the throttle block apart again and noticed a white wire that has been cut. Any idea as to where this should be? Or what it is for.

Jorgy, is this not the thread were we ask and check for conditions? I read a few pages back where they said they were parking at the 2 km mark and large trailers were not recommended. All I was asking is if that was still the case. It has been several years since we have been there so I may...

Is the parking still at km 2 for Boulder? We are heading that way on Thursday and was hoping that the snow level was lower as we only have an enclosed trailer.

Allseasons, it does it as you are riding, if you are just going slow holding the throttle steady it will start big and then just cuts out. If you let off and feather it it will come back but if you just hold the throttle steady it will stall. I will check the things you have mentioned thanks

Just finished up the dryer. Seems to work work may have to put a little bigger and a couple more holes in the uprights.

Thinking of heading that way on the 29th another couple of weeks it should be plenty by then. It will be our first trip that way in about 10 years. There will be a couple newbies with us can anyone make recommendations where to head first? They are not new to sledding just to mountain riding.

Ok guys. Just finished installing new reeds and have unhooked the tss and the sled still wants to die and stall when running at a slow speed. Even if you feather the throttle sometimes it comes back but more than enough it stalls. However it starts right back up. Any thoughts?

I am going to build the same type of abs boot and glove dryer and was wondering what size of holes to drill and how many in the 1 1/2 abs pipe and do you put holes in the cap at the top or just down the sides of the pipe?

2012 800 Proclimb has a bad bog. Almost puts you over the handle bars if you are standing up. Anyone have any luck with by passing the TSS would like to try this first.

2012 Proclimb has a bad bog almost puts you over the handle bars when riding standing up. Have heard in the past it could be a faulty TSS. Anyone have any luck by passing this? Would like to try it to see if that is it before I go looking somewhere else.